7 Ways To Fix A Clogged Shower Drain

A clogged shower drain is a frustrating plumbing issue that can disrupt your daily routine. If your shower drain is not draining water properly, there are several ways to fix the problem, including engaging drain cleaning services. This guide will outline 7 ways to fix a clogged shower drain.

Use a Plunger

A plunger is an effective tool for removing clogs from a shower drain. First, remove the drain cover and fill the shower base with enough water to cover the plunger’s bell. Place the plunger over the drain and apply pressure, pushing, and pulling to create suction. After a few tries, the clog should loosen and the water will drain.

Use a Drain Snake

A long, flexible cable that can be inserted into the drain to clear obstructions is called a drain snake, also referred to as a plumber’s snake or an auger. To advance the cable, insert the snake into the drain and turn the handle in a clockwise direction. When you encounter resistance, turn the handle in the opposite direction to clear the obstruction. Remove the snake from the drain and clean up any leftover debris.

Use Baking Soda and Vinegar

Clogs in shower drains can be removed naturally and efficiently using baking soda and vinegar. Pour half a cup of baking soda and half a cup of vinegar down the drain. Let the mixture sit in the drain for 15 to 20 minutes under a drain cover or stopper. After that, flush the clog out of the drain with hot water.

Use a Commercial Drain Cleaner

There might be a need to use a commercial drain cleaner if the clog is particularly obstinate. Make sure to pick a cleaner that won’t harm your plumbing system and carefully follow the directions. Typically, you will pour the cleaner down the drain, let it sit for a certain amount of time, and then flush it with water.

Clean the Drain Cover

Sometimes the clog is caused by a buildup of hair and debris on the drain cover. Remove the cover and clean it thoroughly, removing any hair and debris. Use a toothbrush to scrub away any stubborn grime.

Remove the Trap

You might have to take out the trap in order to clear the clog if it is there. Put a bucket under the trap to collect any water first. After that, remove the slip nuts by using a wrench and the trap. Use a drain snake or a wire coat hanger to unclog any obstructions in the trap. Tighten the slip nuts and reattach the trap.

Call a Professional

If none of these methods work, it may be time to call a professional plumber. A plumber has the tools and expertise to remove even the toughest clogs and can identify and fix any underlying plumbing issues.

A clogged shower drain can be a frustrating plumbing problem, but there are several ways to fix it. From using a plunger or drain snake to using baking soda and vinegar or a commercial drain cleaner, there are many effective methods for clearing a clog. If all else fails, don’t hesitate to call a professional plumber to fix the problem.